Contact Adhesive Spray 500ml for Wall Tiles and Turf

The contact adhesive spray we use to fix foam wall tiles and turf in a golf simulator room. Fast-drying and firm-holding, it bonds foam, turf and rubber to timber, plasterboard, MDF, metal and most other surfaces, indoors or out.

How many cans you need

• Foam wall and ceiling tiles: about 1 can for every 3.5m² of tiles. Work it out wall by wall and round up: a 2 × 3m side wall (6m²) takes 2 cans. Add one spare for ceiling or overhead work.
• Putting turf and tee turf: glue the edges, the seams and around a flush hitting mat rather than the whole floor: about 1 can for every 10m² of turf.
• A typical sim room with padded side walls and ceiling plus a turf floor takes 7 to 9 cans. Not sure? Message our sim experts with your room and we'll count them for you.

How to use it

1. Make sure both surfaces are clean, dry and free of dust.
2. Shake the can well, then spray an even coat on the back of the tile or turf and on the wall or floor.
3. Leave both until the adhesive is touch-dry and tacky, usually a few minutes.
4. Press the tile or turf firmly into place. Contact adhesive grabs straight away, so position carefully before it touches.

Use in a well-ventilated room and keep away from flames and heat. Follow the safety instructions on the can.

What's included

1 × 500ml aerosol can. Ships with our sim kit and accessories; UK delivery £5.